Tianjin Foccred International Trade Co., Ltd. - Supplier of Welded Wire Mesh for Concrete Reinforcement
Reinforcing mesh, also known as welded wire mesh for concrete or WWF, is a factory-fabricated grid of low-carbon steel wires electrically welded at every intersection. Laid into concrete formwork, it provides tensile reinforcement, controls thermal and shrinkage cracking, and speeds up placement compared with tying loose rebar on site. Tianjin Foccred supplies welded wire mesh in galvanized, PVC-coated and stainless finishes, in a wide range of wire diameters, mesh openings and panel sizes for slabs, walls, pavements and precast work.
Product Advantages

Uniform welded grid: every intersection is welded for consistent opening and a flat, even profile during transport and placement.
Strength and crack control: the grid carries tensile stress that plain concrete cannot, reducing thermal and shrinkage cracking.
Fast installation: prefabricated sheets and rolls place far quicker than tying loose rebar bar by bar.
Finish options: plain, hot-dip galvanized, PVC-coated and stainless steel to match the exposure environment.
Flexible formats: rolls up to 30 m and custom panels; wire diameter, opening and size made to your drawing.
Product Details
| Welded Wire Mesh / Reinforcing Mesh Specifications | |||
| Standard Welded Wire Mesh | |||
| Opening (inch) | Opening (mm) | Wire Diameter (BWG) | Application |
|---|---|---|---|
| 1/4" x 1/4" | 6.4 x 6.4 | 22, 23, 24 | Fine screens, overlays |
| 1/2" x 1/2" | 12.7 x 12.7 | 16-23 | Screeds, thin overlays |
| 3/4" x 3/4" | 19.1 x 19.1 | 16-21 | Light reinforcement |
| 1" x 1" | 25.4 x 25.4 | 14-21 | Slabs, walls |
| 2" x 2" | 50.8 x 50.8 | 14-16 | Structural slabs |
| 4" x 4" | 100 x 100 | 12-16 | Pavements, heavy slabs |
| Galvanized Welded Wire Mesh | |||
| Opening (inch) | Opening (mm) | Wire Diameter (mm) | Finish |
| 2" x 3" | 50 x 75 | 1.65 / 2.0 / 2.5 | Hot-dip galvanized |
| 3" x 3" | 75 x 75 | 1.65-2.67 | Hot-dip galvanized |
| 4" x 4" | 100 x 100 | 2.0 / 2.5 | Hot-dip galvanized |
| PVC Coated Welded Wire Mesh | |||
| Opening (inch) | Opening (mm) | Wire Diameter (BWG) | Finish |
| 1/2" x 1/2" | 12.7 x 12.7 | 16-21 | PVC coated |
| 1" x 1" | 25.4 x 25.4 | 15-20 | PVC coated |
Technical Note:
1. Standard roll length: 30 m.
2. Standard roll width: 0.5 m to 2.1 m.
3. Panel sizes produced to project requirement; special sizes available at request.
4. Packing: wrapped with waterproof paper, with metal/wood pallet.
5. Base material: low-carbon steel; finishes: plain, hot-dip galvanized, PVC coated, stainless steel.
Previous Page
Next Page
Power by: cnwangju.com Sitemap